Mimaki Driver Ver.5.9.5 (64bit)
种类 | Device Driver |
---|---|
版本 | 5.9.5 |
公开日 | 2024年07月19日 |
适用OS |
Windows 10 (64bit) Windows 11 |
对应机型 | APC-130, CF3-1610M, CF3-1610R1, CF3-1610TF2, CF3-1631M, CF3-1631R1, CF3-1631TF2, CF22-1225RC-S, CF22-1225RT-S, CF22-1225T-S, CF22-1225TD-S, CF22-1225TF-S, CG-60AR, CG-60SRIII, CG-75FXII, CG-75FXII Plus, CG-100AR, CG-100SRIII, CG-130AR, CG-130FXII, CG-130FXII Plus, CG-130SRIII, CG-160FXII, CG-160FXII Plus, CJV150-75, CJV150-75BS, CJV150-107, CJV150-107BS, CJV150-130, CJV150-130BS, CJV150-160, CJV150-160BS, CJV300-130, CJV300-130 Plus, CJV300-130BS, CJV300-160, CJV300-160 Plus, CJV300-160BS, CJV330-130, CJV330-160, JFX200-2513, JFX200-2513 EX, JFX600-2513, JFX600-2531, JV100-160, JV150-130, JV150-130A, JV150-130BS, JV150-160, JV150-160A, JV150-160BS, JV300-130, JV300-130 Plus, JV300-130A, JV300-130BS, JV300-160, JV300-160 Plus, JV300-160A, JV300-160BS, JV300-190, JV330-130, JV330-160, TS100-1600, TS330-1600, TxF150-75, TxF300-75, UCJV300-75, UCJV300-107, UCJV300-130, UCJV300-160, UCJV330-130, UCJV330-160, UJF-3042 , UJF-3042FX, UJF-3042HG, UJF-3042MkII, UJF-3042MkII EX, UJF-3042MkII EX e, UJF-3042MkII e, UJF-6042, UJF-6042MkII, UJF-6042MkII e, UJF-7151 plus, UJF-7151 plusII, UJF-A3MkII, UJF-A3MkII EX, UJV100-160, UJV100-160Plus |
The following functions have been change
[Ver.5.9.4 -> Ver.5.9.5]
- The following ink is available in JFX600-2513 / JFX600-2531.
LUS-120 6Color+WCl
LUS-150 6Color+WCl
- Job names can now be displayed in the PICT print history.
TxF150, TxF300, KebabHS(UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe)
[Ver.5.9.3 -> Ver.5.9.4]
- The following ink is available in UCJV330.
LUS-190 4Color / 4Color+WW
LUS-210 4Color / 4Color+WW
[Ver.5.9.2 -> Ver.5.9.3]
- The following models are available.
JFX600-2531
- Job names can now be displayed in the PICT print history.
JV330, CJV330, TS330, UCJV330
[Ver.5.9.0.5 -> Ver.5.9.2]
- The following ink is available in JFX600.
LUS-211 4Color / 4Color+ClClWW
- The following ink is available in UCJV330.
LUS-200 4Color / 4Color+WW
[Ver.5.9.0 -> Ver.5.9.0.5]
- The following defects have been improved.
- There are cases where white ink may be output too thick.
[Target printer] TxF150, TxF300
[Ver.5.8.2 -> Ver.5.9.0]
- The following defects have been improved.
- Communication error or printing stops occur at random times.
[Ver.5.8.0 -> Ver.5.8.2]
- The following ink is available in JFX200EX.
LUS-211 4Color+ClClWW
[Ver.5.7.3 -> Ver.5.8.0]
- The following models are available.
UCJV330, UJV100Plus
[Ver.5.7.2 -> Ver.5.7.3]
- The following ink is available in JFX600.
LUS-120 4Color+ClClWW, LUS-150 4Color+ClClWW
[Ver.5.7.1 -> Ver.5.7.2]
- The following models are available.
TxF300
[Ver.5.7.0 -> Ver.5.7.1]
- The following defects have been improved.
- Nozzle Recovery may not be enabled.
[Target printer] JV100, TS100, UJV100
[Ver.5.6.9 -> Ver.5.7.0]
- The following models are available.
JFX200EX
- The following defects have been improved.
- Manual MAPS may not be enabled.
[Target printer] JV300, CJV300, JV150, CJV150
[Ver.5.6.8 -> Ver.5.6.9]
- The following models are available.
TxF150
- The following defects have been improved.
- When using nozzle recovery on two layers, the panel may indicate that some nozzles are not recoverable even though nozzle recovery is possible.
[Target printer] JV330, CJV330
[Ver.5.6.7 -> Ver.5.6.8]
- The following defects have been improved.
- When setting [Step & Repeat] and print, printing speed slows down.
- When combining [RIP and Print] and [Tiling], the left edge of the second and subsequent tiles may be cut off by several centimeters.
- At MkII and MkIIe, discharged result has changed only specific data.
- JFX600 which mounted LUS-120 four colors are not displayed on the printer registration screen, and the printer cannot be registered.
- The layer output icon is not displayed on the thumbnail image during 2.5D printing/ composite printing.
- When combining the pre-print margin and [Step & Repeat], a portion of the printing area is output without printing.
[Ver.5.6.6 -> Ver.5.6.7]
- When using RasterLink7, primer recommended density has been supported at LH-100 and LUS-120 in JFX600
- The following defects have been improved.
When using RasterLink7, white ink at higher density printing cannot be executed in the combinations of printer and ink set described below.
[Target printer] UJF-6042MkIIe、UJF-3042MkII Ex e Ink set: CMYKClPrWW
[Ver.5.6.5 -> Ver.5.6.6]
- Improved operation during Ethernet communication.
[Ver.5.6.4 -> Ver.5.6.5]
- The following defects have been improved.
- When nozzle recovery is enabled, an error may occur during output.
[Target printer] JV300, JV150, CJV300, CJV150
[Ver.5.6.3 -> Ver.5.6.4]
- The following Colors are available in JFX600.
LUS-120 4Color / 6Color+SP / 4Color+SP
[Ver.5.6.2.2 -> Ver.5.6.3]
- The following defects have been improved.
- Cannot output from FineCoat when using DCF-605PU.
- When using combination of USB1.1 and Windows10/11, connection may not be possible depending on state of PC UCSI device (USB type-C).
[Target printer] USB1.1 device (CG-SR2, CG-FXII)
[Ver.5.6.2 -> Ver.5.6.2.2]
- The following defects have been improved.
- Fix the defect that may cause graininess when printed with Hi scan.
[Target printer] UJV100 4C+SP, UJV100 SP+4C, JV100 8C
[Ver.5.6.1 -> Ver.5.6.2]
- The following models are available.
JV330, CJV330, TS330
- LUS-200 ink is available in the following printers.
UJF-3042MkII, UJF-3042MkII EX, UJF-6042MkII
The following Colors are available in JFX600.
- LUS-150 4Color, LUS-150 6Color+SP
[Ver.5.6.0 -> Ver.5.6.1]
- LUS-210 ver2 ink is available in UJV100.
[Ver.5.5.3 -> Ver.5.6.0]
- LUS-200 ink is available in the following printers.
UJF-3042MkII e, UJF-3042MkII Ex e, UJF-6042MkII e
[Ver.5.5.2 -> Ver.5.5.3]
- The following defects have been improved.
For a job of color layer or white layer, illuminance does not change at printing even after illuminance of UV mode is changed and printing is executed.
[Ver.5.5.1 -> Ver.5.5.2]
- In JFX600, Glossy Print can be selected by UV mode of clear plate.
- In JFX600, following Special Color Over Print is available.
[Ver.5.5.0 -> Ver.5.5.1]
- Added support for silver ink on the UJF-7151plusII.
[Ver.5.4.2 -> Ver.5.5.0]
- The following models are available.
UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe, UJF-3042MkII EXe
[Ver.5.4.1 -> Ver.5.4.2]
- The following models are available.
UCJV300
[Ver.5.4.0 -> Ver.5.4.1]
- The following models are available.
UJF-7151, UJF-6042MkII, UJF-3042MkII, UJF-3042MkII EX, UJF-A3MkII, UJF-A3MkII EX
[Ver.5.3.3 -> Ver.5.4.0]
- The following models are available.
JV300, JV150, JV300Plus, CJV300, CJV150, CJV300Plus
[Ver.5.3.0 -> Ver.5.3.3]
- Image quality defects that occur under certain conditions have been improved.
[Ver.5.1.0 -> Ver.5.3.0]
- TS100 are available.
- Improved operation during Ethernet communication. (JV100, UJV100)
[Ver.5.1.0]
- JV100 is available.
下载时的注意事项
下载本软件之前,请务必阅读下列使用许可协议。
软件使用许可协议
客户下载本软件就说明已同意接受本协议的约束。
第1条. 定义
- 所谓“软件”是指与本协议同时提供的计算机程序。
- 所谓“相关资料”是指与本软件一起提供的文本数据的打印资料以及本公司可能在日后提供的打印资料。
- 所谓“本软件”是指本公司向客户提供的软件以及相关资料及软件复制品。
第2条. 限制事项
- 严禁违反本协议条款制作本软件复制品。
- 严禁更改本软件或进行反向工程。此外,也不可转让、借与第三者或允许其再利用。也不可转移本协议上的地位。
- 严禁将本软件租赁或以类似租赁的方式转让给第三方,也不可进行授权、转卖或从第三方受领、接受授权或承购。
- 严禁将本软件当作二手软件转让给第三方或者授权、接受授权或承购。
第3条. 保修的限定
- 不保证软件所含功能符合客户的使用目的。
- 选择和导入本软件是以客户的责任进行的操作,将本软件安装在电脑硬盘及绘图机内存时发生损害以及操作上的损害将不予保修。
- 对于使用本软件所产生的应用结果(包括收入或利益上的流失),不承担任何责任。
第4条. 有効期间
- 本协议的有效期间起始于客户安装本软件之时。
- 客户决定停止使用软件时,本协议自动结束。
- 客户不遵守本协议条款时,无需本公司通知,本协议将立即结束。 本协议结束时,必须完全废弃本软件。