上海御牧貿易有限公司

The print result is blurred or ink splatters.

  • See the followings.

1. There may be a nozzle malfunction (missing or misaligned).
Please review the test print and refer to the following FAQ if a nozzle malfunction occurs. Restore the nozzles to their normal state accordingly.

Q: TEST PRINT is not printed successfully


2. Adjust the head height (head gap) according to the media you are using.
When the head is too height (resulting in a larger gap between the media and nozzle surface), ink spattering is more likely to occur.
Unless there is a reason such as media rubbing, please use the head in the lower position.

Please refer to the "Operation Manual" for adjusting the head height (head gap).

JV400-LX: Operation Manual


Return to Content

返回頁首