- Follow the steps below to confirm the test printing.
Print a test pattern to confirm that the ink prints correctly.
1. On the LOCAL mode screen, select [TEST PRINT/CLEANING] > [TEST PRINT], press the [ENTER] key.
The Test Print menu is displayed.
2. Select [Scan Dir.] or [Feed Dir.], then press the [ENTER] key.
Test printing starts.
![](/archives/047/202109/d117b5a2f0c6c8a10b2d50002e91bac7ed641a9d29f20642e77947537bf2b5a0.png)
* You can change the layout direction for test printing.
Scan direction: prints repeatedly in the horizontal direction.
Feed direction: feeds the medium and prints repeatedly in the longitudinal direction.
Perform head cleaning [Cleaning] if you observe any ejection failures.
(e.g., nozzle clogging or deflection)
Example of ejection failures
![](/archives/046/202303/234340f0bf7862fc070003f992c57cb66d6745c7d0674262d2ca96652d6263e7.png)
3. Check the print results.