RasterLink6Plus installation PC
OS | Microsoft® Windows 7® Home Premium Service Pack1 or later (32-bit/64-bit version) Microsoft® Windows 11® Home |
Minimum required system
At least a PC with the following specifications is required to use RasterLink6Plus:
CPU | Intel® Core2 Duo 1.8GHz or higher*1 |
Chip set | Intel genuine chip set*1 |
Memory | 2GB or more |
Disk space | Free space of 100 GB or more (NTFS format) |
Interface | Ethernet port*2, USB1.1/2.0*3 |
Recommended system
OS | Windows 10® Pro 64bit |
CPU | Intel® Core™ i5-4670K (3.4GHz) |
Chip set | Intel® Z87 Express |
Memory | 8GB |
Disk space | 500 GB |
Interface | Ethernet port*2, USB1.1/2.0*3 |
- Use an Intel CPU and an Intel chip set. Otherwise, an error may occur during printing, causing the printer to stop printing.
- It is required for license activation. (It is still required even if the system has no Internet access or a PPP-connected network device is used.)
(For Ethernet-connection-enabled printers only) An Ethernet port is required to connect the printer. Use a PC that supports 1000BASE-T (Gigabit). For details, refer to the Important section below. - A USB2.0 port is required to connect to a printer. Do not use a USB hub and an extension cable when connecting to the printer. An error may occur during printing, causing the printer to stop printing.
(For dongle-version products only) A USB1.1 or USB2.0 port is required to attach the USB dongle. Do not attach the dongle via a USB hub.
- PC: The LAN port supports the 1000BASE-T (gigabit) mode.
- Cable: It is the CAT6 or higher cable.
- Hub (if used): It supports the 1000BASE-T (gigabit) connection.
- For the latest information, visit our official website (https://mimaki.com/).
Limitations on printing via network
- The system is not available over a wireless LAN or on a PLC.
- The system is not available on a VPN.
- When used with a wireless LAN, the system may not be able to connect to a printer. In this case, disable the wireless LAN.
- The RasterLinkPC is available only when it is on the same segment as the printer.
- If the network experiences high load during data transfer to the printer (for example, downloading a video at the same time), the sufficient transfer rate may not be achieved.
