上海御牧貿易有限公司

TEST PRINT is not printed successfully

  • When you perform a TEST PRINT and see problems such as missing nozzles, deflections, or color mixtures, check the following:

【Procedure】
1. Clean the wiper, cap, head and surrounding area. It increases the success rate of the cleaning.
2. Perform the head cleaning (normal).
3. Perform the head cleaning (hard).
4. Perform NOZZLE WASH to wash off the ink stuck to the nozzle head.
5. Perform AIR PG (air purge). It is effective to resolve color mixtures or aerations.
6. Perform RECOVERY NOZZLE.
7. Check that the installation environment conforms to the specification.
For details, see "Q. Printer installation environment."
8. If the above steps do not fix the problem, please contact us.

For details about each step, see "Operation Manual" ,"Request for Daily Care and Maintenance"
and the video "Maintaining the Capping Station" and “Cleaning around the ink Head”.




Return to Content

返回頁首