上海御牧貿易有限公司

Tell me about Nozzle recovery

  • NOZZLE RECOVERY: When nozzles missing cannot be improved at specific points, other good nozzles can be used as alternatives for printing.

NOZZLE RECOVERY: When nozzles missing cannot be improved at specific points, other good nozzles can be used as alternatives for printing.
Printing operation can be continued by nozzle recover function until service engineer arrival so work downtime is saved.

・ Up to 10 nozzles can be registered per 1 nozzle line.
・ Depending on the registered nozzle, there is a mode on which recovery is not reflected.
Check the print condition for which recovery cannot be performed.
・ Even if you register the NOZZLE RECOVERY, the pattern of test print etc. is not recovered.
For the lowest number of passes of the drawing mode, the NOZZLE RECOVERY function
is invalid.
For details, refer to followings. ※Machine will work without recovery depending on the setting.

【4 color mode】



【6 color mode】



For details, refer to "Operation Manual"


Return to Content

返回頁首